PR411DR-SET - Standard version.
The battery shown in the photo is not included in the PR411DR-SET.
-
PR411DR-SET Access Control Set
Call For Price -
PR411DR
Call For PriceThe access controller for single door, mounted inside plastic enclosure dedicated to installation on 35mm DIN rail, operating with AC supply, equipped with built in 1.5 A buffered power supply, requires connection of external proximity readers. -
PR402DR-SET Access Control Set
Call For PriceAccess control set with PR402DR access controller and PS-10ACDR power transformer factory pre-installed in ME-4 metal enclosure. -
PR402DR
Call For PriceThe access controller for single door, mounted inside plastic enclosure dedicated to installation on 35mm DIN rail, operating with AC supply, equipped with built in 1.5 A buffered power supply, requires connection of external proximity readers. -
PR402-BRD
Call For PricePR402-BRD - Access controller electronic module (board). ME-1 - Metal enclosure for installation of 1 PR402 board (includes 40VA transformer). ME-2-S - Metal enclosure with 80VA transformer, key lock and assembly kit prepared for installation of RACS 4 modules. -
PR312
Call For PriceOutdoor access controller, built-in EM 125 kHz proximity reader, connecting cable 0.5 m, silicone keypad with backlight, two function keys. -
PR311SE
Call For PriceOutdoor access controller, built-in EM 125 kHz proximity reader, connecting cable 0.5 m, silicone keypad with backlight, two function keys. -
PR302
Call For PricePR302 - Standard version. -
PR301
Call For PriceIndoor access controller, built-in EM 125 kHz proximity reader, bolted contacts, silicone keypad with backlight. -
PR201
Call For PriceIndoor access controller, built-in EM 125 kHz proximity reader, bolted contacts. -
PR102DR
Call For PricePR102DR - controller in DIN 35mm rail plastic enclosure. -
PR-GP-BRD Adjusting-separation Module
Call For PricePR-GP-BRD - Standard version. -
EMC-1 Proximity Card
Call For PriceEMC-1 - Standard version. -
ME-1 Metal Enclosure
Call For PriceMetal enclosure equipped with 40VA transformer, tamper contact and DIN 35mm rail. Depending on particular requirements, devices can be installed on DIN rail or directly to enclosure back wall. ML-1 mechanic lock is optionally available. -
CPR32-NET-BRD Network Controller
Call For PriceCPR32-NET-BRD - Electronic module of network controller without enclosure. -
DB8000
Call For PriceCommon base, applicable for the standard fire alarm installations. -
7100A
Call For Price -
FS5201
Call For Price– 8 fire alarm lines -
SV2002F
Call For PriceSV2002F siren is designed to complete fire alarm systems in flats, shops, offices, warehouses and etc. under cover. -
FD3050G
Call For PriceExtension releаse button FD3050G is designed to operate independantly, activating the automatic that allows the extinguishing process to be started, using aditional source of extinguishing reagent. -
FD7201S
Call For PriceIt is designated to connect conventional fire alarm line (with up to 32 fire detectors) as a part of the addressable fire alarm system IFS7000. The built-in short circuit isolator is available. -
FD4201
Call For PriceModule FD 4201 expands the options of fire control panel FS4000. -
FD7203IO 1IN/1OUT
Call For Price -
FD7203IO 3IN/6OUT
Call For PriceIt is designed to perform control over external devices for the fire alarm system IFS7000 in Duty mode and upon detection of Fire Condition. The module is power supplied via the power loop, and it is controlled via the signal loop. The built-in short circuit isolators are available. -
RI31
Call For PriceDesigned to duplicate the light signal from activated automatic fire detector. Central placed LED (f10 mm) and specially designed reflector provides maximal visibility. -
RI 31S
Call For Price -
EI208DW
Call For PriceEi208DW stand-alone carbon monoxide detector with display
The product serves for the detection of CO (carbon monoxide) gas and early warning to avoid the harmful effects of this gas on human health. -
DE06-12
Call For PriceDE06-12 Power supply 12V / 0.5A
This switch-mode power supply is designed for powering a wireless keypad, and also for powering other 12V DC devices like GSM communicators or UC receivers made by Jablotron. -
SD-503ST
Call For PriceSD-503ST Stand-alone combined smoke and heat detector
The SD-503ST is used to detect fire hazards in the interior of residential or commercial buildings. The detector can be installed in mobile homes or caravans. The product is not designed to be installed in industrial premises. -
SA214-7
Call For PriceSA214-7 Rechargeable battery
Pb rechargeable battery (12 V / 7 Ah) -
SA214-2.6
Call For PriceSA214-2.6 Rechargeable battery
Pb rechargeable battery (12 V / 2.6 Ah) -
SA214-18
Call For PriceSA214-18 Rechargeable battery
Pb rechargeable battery (12 V / 18 Ah) -
SA214-1.3
Call For PriceSA214-1.3 Rechargeable battery
Pb rechargeable battery (12 V / 1.3 Ah) -
SA206-1.3
Call For PriceSA206-1.3 Power Supplies
Pb rechargeable battery (6 V / 1.3 Ah) -
PC-02B
Call For PricePC-02B RFID entry keyfob - Black
The PC-02B is a black keyfob RFID card (standard EM UNIQUE 125kHz). The system can assign up to 50 keyfobs. For added protection, use the keyfob while entering the code. Can be used on the JA-81F, JA-81E, JA-80F, JA-80E, 80H-JA or JA-80N. -
BAT-3V6-AA-LS
Call For PriceBAT-3V6-AA-LS lithium battery
Lithium battery type CR14500 (AA) 3.6 V / 2.45 Ah
