JA-120PC Bus PIR Motion Detector with Camera
The JA-120PC is a bus-powered PIR movement detector with a colour camera which takes colour images of up to 640 x 480 pixels definition.-
JA-120PC
Call For Price -
JA-122E
Call For PriceJA-122E BUS outdoor access module with RFID
The RFID card reader can be used for the activation of a PG output by which you can control access to an area by, for example, an electric lock. The module only has a reading part and optical status indication. -
JA-120PB
Call For PriceJA-120PB Bus combined PIR motion and glass-break detector
It serves for the detection of human movement in building interiors and for the detection of breaking glass windows. This detector combines two sensors (PIR motion & acoustic glass break) in one housing. -
JA-120N
Call For PriceJA-120N Bus module for control of an electric lock
The JA-120N module is designed for the power supply and control of electric locks and release systems from the system bus. It is fitted with batteries that ensure the initial current impulse required to open el. locks. -
JA-118N
Call For PriceJA-118N eight-channel bus output module
The JA-118N eight-channel output module provides outputs for signaling the status of 8 sections, signaling IW / EW alarms in the 8 sections or the status of 8 PG outputs. -
JA-116H
Call For PriceJA-116H BUS expander – 16 inputs
Bus expander is used for powering and connecting up to 16 detectors with contact outputs. It is possible to install the module straight into the JA-106K control panel. -
JA-111SH
Call For PriceJA-111SH Bus shock and tilt detector
This may be used for safes, artworks etc. The detector uses a semiconductor tri-axial accelerometer with a digital output. Its signal processing guarantees a high immunity against false alarms.Technical specifications
Power from control panel bus 12 V (9…15 V) Current consumption in standby mode 5 mA Current consumption for cable choice 5 mA Dimensions 55 x 27 x 16 mm Classification grade 2 according to EN 50131-1, CLC/TS 50131-2-8 Operational environment EN 50131-1 II. Indoor general Operating temperature range -10 to +40 °C Also complies with EN 50130-4, EN 55022 -
JA-111R
Call For PriceJA-111R Bus interface for JA-100 wireless devices
The JA-111R radio bus module is used to connect all wireless devices of the JABLOTRON 100 system. To perfectly cover the supervised premises, up to 3 JA-111R modules can be installed in a system. -
JA-111H
Call For PriceJA-111H TRB Bus module interface for wire detector
The JA-111H TRB module is designed for the connection of any wired detector (with contact or impulse outputs) to the JABLOTRON 100 system and provides it with a power supply. -
JA-111A BASE RB
Call For PriceJA-111A RB bus external siren
The JA-111A RB bus external siren is designed to sound alarms and to signal activation and deactivation of PG outputs in the security system. The siren communicates with and is powered by the bus. -
JA-110T
Call For PriceJA-110T bus short-circuit isolator module
The JA-110T bus isolator is designed to electrically seperate and protect vulnerable parts of the bus . It is powered by the bus. It can be installed in a JA-190PL box. -
JA-110P
Call For PriceJA-110P Bus PIR motion detector
The JA-110P is a bus PIR motion detector designed to protect interiors by infrared motion detection in the room . The characteristics of detection can be optimized by using interchangeable lenses. -
JA-110N
Call For PriceJA-110N Bus power output module PG
The JA-110N power output module PG offers a switching relay (16 A) with NO or NC modes . The corresponding PG output copied is set by DIP switch (one of the PG outputs PG 1 - 32) -
JA-110I
Call For PriceJA-110I bus section/output PG activation indicator
The JA-110i indicator signals section setting or PG output activation (1-32) by a red LED . It is connected to the control panel via the bus. -
JA-110A
Call For PriceJA-110A Bus internal siren
The JA-110A Bus siren is for indoor use and is designed to sound alarms, as well as entrance and exit delays and PG activations in the security system. -
C7
€159.72 €188.47 inc.Vat- Intercom with indoor monitor
- Zinc alloy polish casing
- Camera: CCD
- Working voltage: DC 12V
- Waterproof: IP54
-
RC-89 Wireless Doorbell
Call For PriceRC-89 Wireless doorbell button
The RC-89 doorbell (or panic) button works as a wireless doorbell button together with a JA-80 siren. Can be enrolled to the control panel as a panic button or to AC and UC receivers to operate relays. -
RC-87 wireless wrist button
Call For PriceRC-87 wireless wrist button
The RC-87 is for Jablotron’s Oasis 80 system and allows users to trigger panic alarms or to control appliances remotely. It is especially designed for personal calls for help. -
JA-80N outdoor RFID reader
Call For PriceJA-80N outdoor RFID reader
The JA-80N is an access card reader for door access control. Cabled to a CP via a WJ-80 interface -
JA-80H outdoor keypad
Call For PriceJA-80H outdoor keypad
The JA-80H keypad has an access card reader, a door bell button and illuminated keys. Controls door access and also operates the control panel. Cabled to a CP via a WJ-80 interface. -
JA-81E RGB wired keypad
Call For PriceJA-81E RGB wi red keypad with multi-colour display
The JA-81E RGB is to control/program the system and has a built-in proximity access card reader with an input for a separate door detector and a variable colour display. The wired keypad is bus-powered. -
JA-81F-RGB
Call For PriceJA-81F RGB wireless keypad with multi-colour display
The battery-powered JA-81F is to control/program the system and has a built-in proximity access card reader with an input for a separate door detector and a variable background -
JA-81F wireless keypad
Call For PriceJA-81F wireless keypad
The JA-81F is to control/program the system and has a built-in proximity access card reader with an input for a separate door detector. The wireless keypad is battery-powered. -
JA-82Y GSM Communicator
Call For PriceJA-82Y GSM Communicator
A GSM communicator module which allows remote access via GSM and the Internet. Reports events to mobiles (SMS and voice messages) and monitoring stations. It has a built-in module for receiving pictures from the JA-84P camera PIR detector .