V-TEC DT607F/ID/FE/S2 2-Button Flush-Mount RFID Video Door Station

The V-TEC / 2EASY DT607F/ID/FE/S2 is a stylish, two-button outdoor video door station designed for compatible V-TEC DT Series digital 2-wire intercom systems.

Featuring a 2MP colour fisheye camera, a 170° wide-angle lens, integrated RFID proximity access control and two independent visitor call buttons, this door station provides a practical and convenient entrance solution for properties with two residences or apartments.

Its flush-mounted stainless steel front panel provides a neat, professional finish, making it suitable for residential entrances where a recessed installation is preferred.

Key Features & Benefits

  • Two Independent Call Buttons: Allows visitors to call two separate apartments or residences using compatible indoor monitors.
  • 2MP Colour CMOS Camera: Provides clear video images of visitors at the entrance.
  • 170° Fisheye Camera: Wide-angle viewing helps residents identify visitors standing near the entrance.
  • Built-In RFID Proximity Reader: Allows authorised users to unlock a compatible electric door lock using registered proximity cards or key fobs.
  • Flush-Mount Installation: Recessed design for a clean and professional appearance.
  • Stainless Steel Front Panel: Durable construction suitable for residential entrance applications.
  • Digital 2-Wire Technology: Compatible with supported V-TEC / 2EASY DT Series intercom equipment.
  • Two-Way Audio: Speak with visitors through a compatible indoor monitor.
  • Night-Time Illumination: Automatic illumination assists visitor identification in low-light conditions.
  • Electric Door Release: Supports a compatible primary electric door lock.
  • Optional Second-Door Control: An additional V-TEC DT-RLC module is required to operate a second independent electric door lock or gate.
  • Weather-Resistant Design: IP54 protection rating for appropriate outdoor installations.

Two Call Buttons for Two Residences

The DT607F/ID/FE/S2 features two separate visitor call buttons, making it particularly suitable for buildings with two apartments, maisonettes or individual residences sharing the same entrance.

Each button can be configured to call its designated compatible indoor video monitor or apartment address.

When a visitor presses the appropriate button, the connected indoor station rings and displays the visitor's image, allowing the resident to answer and communicate before granting access.

Please Note: Two call buttons do not mean two independent electric lock outputs. A separate DT-RLC relay module is required where a second door or gate must be controlled independently.

2MP Camera with 170° Wide-Angle Fisheye Lens

The door station features a 2-megapixel, 1/2.7-inch colour CMOS camera with a wide-angle fisheye lens.

Its approximately 170° field of view provides a broad view of the entrance, helping residents identify visitors who may be standing directly in front of the door station or slightly to either side.

When connected to a compatible indoor monitor with fisheye viewing support, additional image-viewing functions may be available.

Built-In RFID Proximity Access Control

The integrated RFID proximity reader provides a convenient alternative to using a traditional key.

Authorised residents can present a compatible, registered RFID card or key fob to activate a connected electric lock.

RFID Features:

  • Built-in proximity access control
  • Support for compatible registered RFID credentials
  • Up to 500 registered user cards, subject to device version
  • Audible and visual indication of access operations
  • Convenient access without using an indoor monitor

Please Note: Additional cards or key fobs may need to be purchased separately. The quantity supplied depends on the product packaging.

Two-Way Audio & Visitor Communication

The built-in microphone and speaker allow two-way audio communication with visitors through compatible V-TEC DT Series indoor monitors.

Residents can see visitors, answer calls and activate a compatible electric lock directly from their indoor monitor.

The door station also provides supported call and unlock status indications.

Electric Door Lock Control

The DT607F/ID/FE/S2 supports a compatible electric door lock through its built-in lock-control interface.

The manufacturer's DT607 series specifications provide an internal lock power output of 12V DC, up to 280mA.

This output is suitable only for compatible electric locks within the specified electrical limits.

Electric locks requiring a different voltage or higher current must use an appropriate external power supply and correct lock-control wiring arrangement.

The unlock duration can be configured from 1 to 99 seconds.

Important: A DT-RLC Module Is Required for a Second Door or Gate

If you wish to operate a second independent electric door lock or gate from the same intercom system, an additional V-TEC DT-RLC relay module is required.

The built-in lock interface operates the primary entrance. The optional DT-RLC Lock Control Interface enables a second locking point to be controlled separately when installed and configured correctly.

This is particularly useful for properties with:

  • A shared entrance door and a second internal entrance
  • A pedestrian gate and a separate main entrance door
  • Two independently controlled electric locks
  • A pedestrian gate and vehicle gate requiring separate control

The DT-RLC relay module is NOT included and must be purchased separately.

Additional lock power supplies, wiring and compatible relay interfaces may also be required depending on the electric lock or gate controller.

Flush-Mount Installation & Dimensions

The DT607F series is designed for recessed or flush-mounted installation, allowing the front panel to sit neatly against the finished wall.

DT607F Flush-Mount Dimensions:

  • Height: 220mm
  • Width: 119mm
  • Depth: 52mm
  • Overall Dimensions: 220 (H) × 119 (W) × 52 (D) mm

Important: These are the manufacturer-listed dimensions for the DT607F flush-mounted range. Please confirm that the supplied S2 variant uses the same enclosure.

The wall recess and mounting-box cut-out dimensions must be checked against the manufacturer's installation drawing before preparing the opening.

Technical Specifications

  • Brand: V-TEC / 2EASY
  • Model: DT607F/ID/FE/S2
  • Product Type: Outdoor Video Door Station
  • System: DT Series Digital 2-Wire BUS
  • Mounting: Flush-Mounted / Recessed
  • Call Buttons: 2
  • Camera: 2MP Colour CMOS
  • Image Sensor: 1/2.7-Inch CMOS
  • Lens: Fisheye
  • Camera Viewing Angle: 170°
  • Audio: Built-In Microphone and Speaker
  • Night Viewing: Automatic Illumination
  • Status Indicators: Call and Unlock Indication
  • RFID Reader: Built-In Proximity Access Control
  • RFID Capacity: Up to 500 User Cards, Subject to Device Version
  • Wiring: 2-Wire, Non-Polarised BUS
  • Power Supply: 24V DC via Compatible DT Series System Equipment
  • Standby Power Consumption: Approximately 0.8W
  • Operating Power Consumption: Approximately 3W
  • Internal Lock Power: 12V DC, Maximum 280mA
  • Unlock Duration: 1–99 Seconds
  • Second Lock Control: Optional DT-RLC Module Required
  • Weather Protection: IP54
  • Front Panel: Stainless Steel, Flush-Mounted Range
  • Operating Temperature: -20°C to +55°C
  • Flush-Mount Series Dimensions: 220 × 119 × 52mm (H × W × D)

Compatible V-TEC DT Series Equipment

The DT607F/ID/FE/S2 is designed to work with compatible V-TEC / 2EASY DT Series components, including:

  • Compatible DT Series indoor video monitors
  • Compatible DT Series power supplies
  • Suitable DT Series distribution equipment
  • Compatible electric door locks
  • Suitable external lock power supplies
  • Optional DT-RLC module for second-door or gate control

Please Note: This is a dedicated DT Series 2-wire intercom device. It is not a standard Ethernet PoE door station and is not automatically interchangeable with V-TEC DH Series equipment.

What's Included?

  • 1 × V-TEC DT607F/ID/FE/S2 Outdoor Video Door Station
  • Manufacturer-Supplied Mounting Components, According to Packaging
  • Product Documentation, Where Supplied

Not Included Unless Specifically Stated: Indoor monitors, DT system power supply, electric locks, external lock power supplies, intercom cable, additional RFID credentials and DT-RLC second-door relay module.

Ideal Applications

  • Properties with two apartments
  • Two-family residences
  • Maisonettes with shared entrances
  • Small residential buildings
  • Private entrances requiring RFID access
  • Compatible V-TEC DT Series intercom upgrades

Important Installation Information

The DT607F/ID/FE/S2 must be connected to suitable V-TEC DT Series equipment and installed according to the manufacturer's instructions.

Correct apartment addressing, wiring, power supply selection, lock compatibility and RFID configuration are essential for reliable operation.

For installations requiring a second independent electric lock or gate, the optional DT-RLC relay module must be purchased separately.

All electrical connections must comply with applicable regulations and manufacturer requirements.

Why Choose the V-TEC DT607F/ID/FE/S2?

The V-TEC DT607F/ID/FE/S2 combines two-button visitor calling, a 2MP wide-angle video camera, integrated RFID access control and an attractive flush-mounted design.

It provides a practical entrance solution for two-apartment properties and shared residential entrances using the V-TEC DT Series 2-wire video intercom system.

For customers who require a second independently controlled entrance, the system can be expanded with the appropriate DT-RLC relay module, available separately.